List of Supported Hardware/Clones for Mapper 20/30

User avatar
Skylancer
Posts: 1
Joined: Mon Apr 23, 2018 1:17 am
Location: Florida
Contact:

List of Supported Hardware/Clones for Mapper 20/30

Post by Skylancer » Mon Apr 23, 2018 1:28 am

Compiling a list of supported Hardware that will run using Mapper 20/30 for those looking to play or develop games!

Currently Testing with Mystic Quest Origins

Working:
Hardware/Clones:
Original NES 1985 Console (NES-100)
Redesigned NES Console (NES-101)
Re-release NES Console (HVS-101)
HyperKin Retron HD* (M01888-GR)
Analogue NT/NT Mini (Rev1)

Emulators:
GameCube (FCEUX)

Not Working:
Hardware/Clones:
HyperKin Retron 5 (Older RetroArch, might be possible if HyperKin patches it)
HyperKin RetroDuo

Emulators:

If you're able to confirm any additional Hardware and Clones, that would be nice to let the community know! :D

Edit:
4/28/2018 - Add Emulators
Last edited by Skylancer on Sun Apr 29, 2018 4:46 am, edited 2 times in total.
Just another curious techie and tinker guru. Retro Consoles and PC Games for life. Bridging the gaps between the old and new generations with Video Games.
User avatar
jsherman
Posts: 163
Joined: Sun Apr 22, 2018 11:25 am
Location: Cleveland OH

Re: List of Supported Hardware/Clones for Mapper 20/30

Post by jsherman » Mon Apr 23, 2018 7:14 pm

Just an FYI, I was able to test my creaton on my modded GameCube running the FCEUX emulator.
"Turtle Rescue" updates can be found here: viewtopic.php?f=13&t=112
User avatar
Redherring32
Posts: 250
Joined: Sat Aug 11, 2018 2:48 pm
Location: Usa

Re: List of Supported Hardware/Clones for Mapper 20/30

Post by Redherring32 » Mon Nov 12, 2018 1:33 am

It also works on the old 3ds, if you run "quicknes".
Fceumm works as well, but it's slow on the old 3ds.
(It may work better on the new 3ds, I'll test soon.)
User avatar
Artix
Posts: 8
Joined: Wed Nov 21, 2018 3:41 am
Location: Tampa, Floridas
Contact:

Re: List of Supported Hardware/Clones for Mapper 20/30

Post by Artix » Mon Nov 26, 2018 4:01 am

Thank you Skylancer, this is a really helpful list!
User avatar
Karakara | Karetro
Posts: 62
Joined: Sun Sep 16, 2018 12:34 am

Re: List of Supported Hardware/Clones for Mapper 20/30

Post by Karakara | Karetro » Wed Nov 28, 2018 5:25 pm

Whats the asterisk near the retron HD for? Just wondering because thats what i own
User avatar
Redherring32
Posts: 250
Joined: Sat Aug 11, 2018 2:48 pm
Location: Usa

Re: List of Supported Hardware/Clones for Mapper 20/30

Post by Redherring32 » Wed Nov 28, 2018 5:49 pm

I'd say it probably means it works on some versions of the retron hd,
I think the only way to know is by testing though.
User avatar
dale_coop
Posts: 1645
Joined: Fri Feb 16, 2018 7:05 am
Location: France

Re: List of Supported Hardware/Clones for Mapper 20/30

Post by dale_coop » Wed Nov 28, 2018 8:48 pm

Karakara | Karetro wrote:
Wed Nov 28, 2018 5:25 pm
Whats the asterisk near the retron HD for? Just wondering because thats what i own
How is the Retros HD, I watched video about it and it said the color palette is off. Is that true? bothersome?
I can't afford a retroUSB AVS (sadly), so I was thinking about a Retros HD or a RetroBit Res+...
-----
Sorry about my poor english
All I need: A Damn Fine Cup of Coffee
My games: PRESS START GAME / UNDERGROUND ADVENTURE
User avatar
Karakara | Karetro
Posts: 62
Joined: Sun Sep 16, 2018 12:34 am

Re: List of Supported Hardware/Clones for Mapper 20/30

Post by Karakara | Karetro » Thu Nov 29, 2018 7:53 pm

dale_coop wrote:
Wed Nov 28, 2018 8:48 pm
Karakara | Karetro wrote:
Wed Nov 28, 2018 5:25 pm
Whats the asterisk near the retron HD for? Just wondering because thats what i own
How is the Retros HD, I watched video about it and it said the color palette is off. Is that true? bothersome?
I can't afford a retroUSB AVS (sadly), so I was thinking about a Retros HD or a RetroBit Res+...
For me personally, I don't see much of a difference in the color palette. Its barely noticeable as far as I can tell, although I'm sure there are exceptions where it would look off. If its there, I don't find it bothersome. I could try to find a way to get some screenshots on different monitors to see if the color varies.
The only issues I've found (no matter how small) were:
  • The HDMI didn't work on my VGA monitor with a converter (Had to use a AV->HDMI instead, it might be my VGA converter). Might be something about the hertz rate.
  • The sample channel sounded a little off with SMB3... might just be my copy or that I never had it until recently, and it sounds different in emulators.
  • (Not a complaint from me) There's a 10ms input lag when using the HDMI
  • Carts are hard to pull out (Pull sideways, it helps)
For the $40 price tag, I would say its a great deal.
User avatar
Redherring32
Posts: 250
Joined: Sat Aug 11, 2018 2:48 pm
Location: Usa

Re: List of Supported Hardware/Clones for Mapper 20/30

Post by Redherring32 » Thu Nov 29, 2018 9:14 pm

Honestly due to my color-blindness I wouldn't even notice a change in colors. :lol:
Also, is it natively vga?
Because I use an hdmi/composite hdtv.
User avatar
Karakara | Karetro
Posts: 62
Joined: Sun Sep 16, 2018 12:34 am

Re: List of Supported Hardware/Clones for Mapper 20/30

Post by Karakara | Karetro » Fri Nov 30, 2018 1:37 pm

Redherring32 wrote:
Thu Nov 29, 2018 9:14 pm
Honestly due to my color-blindness I wouldn't even notice a change in colors. :lol:
Also, is it natively vga?
Because I use an hdmi/composite hdtv.
No, it's natively hdmi/AV, I used a converter box
Post Reply