flasher error

Hi my flasher arived today and wanted to try it out. I installed the driver in the nes maker folder , Ran "InstallDriver.exe" connected up pressed make cart and get this error saying Error Compiling stuff... Please check any code changes you made.

The cmd window b4 that just looked like if i was sending to emulator and didn't have any flasher info. game plays fine on emulator.

is there more drivers i need to install or anything else i need to do?

Please help thanks

Some has resolved their issues with the flasher, here:
http://nesmakers.com/viewtopic.php?p=12453#p12453

(sorry can't help more, I don't have this flasher model)

thanks, il try the other driver. Is there a way to flash a .nes file without going through nes maker in case that's the problem? Or is there a template nes maker project that defo works i could try?

Another possible test, you could try replacing the flasher folder with the one from here: https://www.dropbox.com/s/oj2n2wvach8dgik/Flasher.zip?dl=0
(reinstall the drivers and then in NESMaker, you can try flash the cart... be sure to have plug the cart correctly in the flasher)

Thanks that seemed to work not tested on nes yet. Is ther a region setting i need to worry about, im in the uk.

If your NES is PAL. When you will try the first time your cart in the console, you would have to press the “reset” button 5 or 6 times in a row, to switch your cart from NTSC to PAL (only the first time, because the carts are NTSC by default. And if you do that again, the cart will switch back to NTSC).

Then, when if you want to make your game pal (NESMaker makes ntsc games by default).
You can follow those tutorial for test:
http://nesmakers.com/viewtopic.php?f=16&t=1117&p=7558
Or
http://nesmakers.com/viewtopic.php?f=39&t=2115&p=12740

(NTSC games on pal console would run but slowly)